The AMD B550 Motherboard Overview: ASUS, GIGABYTE, MSI, ASRock, and Others
by Dr. Ian Cutress & Gavin Bonshor on June 16, 2020 11:00 AM ESTASRock B550 Pro4
The B550 Pro4 is a more cost-down version of the Extreme4, where we replace features like the 2.5 gigabit Ethernet with single gigabit Ethernet, as well as reduce the number of power phases and such. Because Pro4 is a different line to Extreme4, there’s also a major overhaul in the styling.
In this instance the power delivery is all situated on the left hand side, with a single heatsink and a shortened rear panel cover that doesn’t cover all the rear panel segments. The socket area is a little busy, with ASRock going for a mix of angles here, so it’s hard to make out but there are three 4-pin headers around the socket, while the CPU is powered by an 8-pin and a 4-pin.
The DRAM slots are still single sided latch designs, and on the right hand side of the board we get an RGB header, the 24-pin ATX connector, a USB 3.0 header, and six SATA ports. Underneath the SATA ports are some built in RGB LEDs.
Unlike some of the other ASRock boards, because Pro4 is a more cost down model, the chipset heatsink is smaller than most. There is an M.2 heatsink, but it’s not attached to the chipset heatsink and sits on its own, but covers the PCIe 4.0 x4 slot from the CPU. There is another M.2 slot below the chipset heatsink, and this is a PCIe 3.0 x2 slot from the chipset. For the PCIe slots, the top slot is a reinforced PCIe 4.0 x16 slot, while the second full-length slot is a PCIe 3.0 x4 from the chipset.
For the rear panel, we get a combination PS/2 port, four USB 3.2 Gen 1 ports, an analog D-Sub port, a HDMI port, space for Wi-Fi antenna, a Type-A USB 3.2 Gen 2 port, a Type-C USB 3.2 Gen 2 port, gigabit Ethernet via a Realtek RTL8111H controller, and audio jacks from a Realtek ALC1200 design.
Facebook
Twitter
RSS
101 Comments
View All Comments
Operandi - Tuesday, June 16, 2020 - link
Looks like some nice mATX versions this round, nice!YB1064 - Thursday, June 18, 2020 - link
I was hoping to see a $75-$90 board.kenjiwing - Tuesday, June 16, 2020 - link
Fortunately, this component is a unique motherboard among B550 and well worth reading up on [add link].Needs to be edited.
anirudhs - Tuesday, June 16, 2020 - link
There's a noise sensor which can adjust fan speed for maximum quietness with good thermals. Saw it on the KitGuruTech video. The noise sensor isn't there to spy on you though.PeterCollier - Wednesday, June 17, 2020 - link
The quality of the editing here is shit tier. Seriously, just run the articles through Grammarly before publication. It's free and it spots plenty of errors.Heavenly71 - Tuesday, June 16, 2020 - link
Sadly none of the mITX boards have more than 6 external USB ports. My old ASUS mITX has 8! And in really small mITX cases you can't add a bracket with more USB, because the two brackets are already used by the gfx card. Guess I have to wait for an enthusiast mITX board )-:damianrobertjones - Tuesday, June 16, 2020 - link
Or, just maybe, get a usb dongle with 4 ports?Mr Perfect - Tuesday, June 16, 2020 - link
That is disappointing. The number of USB devices people need to plug in can't be dropping, surely? I know I've got more now then even a year ago.rrinker - Tuesday, June 16, 2020 - link
Are they really going up? I have 2 USB devices plugged in to my system - a keyboard and a mouse. I occasionally plug a USB stick in one of the front ports to transfer files. My phone and tablet sync over wifi, they don't get plugged in. I have a charger behind my desk and a cable to charge them. My printer is on the network.The one place I DO need lots of USB ports is also the place where I have a small cube case machine, with no discreete GPU, because it doesn;t need one. On that one I added a USB PCI card to get enough ports. In addition to the keyboard and mouse, that machine is on my workbench where it connects to several electronic test instruments and I have multiple cabled for programming microcontrollers. I also have a USB microscope for board inspection. And then I have 3 more USB devices connected for my other hobby that shares the bench. Plus a front port kept free for USB sticks.
So the use case I have for more USB has the PCI slots open to add expansion cards, the use case where I have a discrete GPU eating up the slot space doesn't need an excess of USB ports.
DigitalFreak - Tuesday, June 16, 2020 - link
I use 3 USB 3.0 ports just for my Oculus Rift