The AMD B550 Motherboard Overview: ASUS, GIGABYTE, MSI, ASRock, and Others
by Dr. Ian Cutress & Gavin Bonshor on June 16, 2020 11:00 AM ESTGIGABYTE B550 Gaming X
Moving away from the Aorus branded models, we go down the product to the GIGABYTE B550 Gaming X which follows a simplistic all-black aesthetic, with some grey patterning on the PCB to add contrast. The main features include a 10+3 phase power delivery, two M.2 slots, a Realtek Gigabit Ethernet controller and a Realtek ALC887 HD audio codec.
The GIGABYTE B550 Gaming X is an ATX sized model with two full-length PCIe slots with the top slot operating at PCIe 4.0 x16, and the bottom slot at PCIe 3.0 x4. For storage, there is a single PCIe 4.0 x4 M.2 slot, with a PCIe 3.0 x4 slot, and four SATA ports with support for RAID 0, 1, and 10 arrays. Up to 128 GB of system memory can be installed across four available memory slots, with memory with speeds of up DDR4-4733 officially supported. Delivering power to the CPU is a single 8-pin 12 V ATX power input, while GIGABYTE advertises the board to feature a 10+3 phase design.
On the rear panel is a single USB 3.2 G2 Type-A, with there USB 3.2 G1 Type-A and two USB 2.0 ports. There is a PS/2 combo keyboard and mouse port for users with legacy peripherals, while a Realtek ALC887 HD audio codec powers the boards three 3.5 mm audio jacks. A Realtek 8111 Gigabit Ethernet controller controls a single RJ45 port, while a handy Q-Flash Plus button is located on the rear to allow users to update the board's firmware easily.
The GIGABYTE B550 Gaming X is targeted towards entry-level gamers looking to harness the power of AMD's 7nm Ryzen processors while offering all the basics expected from a PCIe 4.0 enabled motherboard. This model has an MSRP of $139, which does seem expensive given the use of budget controllers, nor does it include any M.2 heatsinks which would have made it slightly more favorable.
Facebook
Twitter
RSS
101 Comments
View All Comments
Operandi - Tuesday, June 16, 2020 - link
Looks like some nice mATX versions this round, nice!YB1064 - Thursday, June 18, 2020 - link
I was hoping to see a $75-$90 board.kenjiwing - Tuesday, June 16, 2020 - link
Fortunately, this component is a unique motherboard among B550 and well worth reading up on [add link].Needs to be edited.
anirudhs - Tuesday, June 16, 2020 - link
There's a noise sensor which can adjust fan speed for maximum quietness with good thermals. Saw it on the KitGuruTech video. The noise sensor isn't there to spy on you though.PeterCollier - Wednesday, June 17, 2020 - link
The quality of the editing here is shit tier. Seriously, just run the articles through Grammarly before publication. It's free and it spots plenty of errors.Heavenly71 - Tuesday, June 16, 2020 - link
Sadly none of the mITX boards have more than 6 external USB ports. My old ASUS mITX has 8! And in really small mITX cases you can't add a bracket with more USB, because the two brackets are already used by the gfx card. Guess I have to wait for an enthusiast mITX board )-:damianrobertjones - Tuesday, June 16, 2020 - link
Or, just maybe, get a usb dongle with 4 ports?Mr Perfect - Tuesday, June 16, 2020 - link
That is disappointing. The number of USB devices people need to plug in can't be dropping, surely? I know I've got more now then even a year ago.rrinker - Tuesday, June 16, 2020 - link
Are they really going up? I have 2 USB devices plugged in to my system - a keyboard and a mouse. I occasionally plug a USB stick in one of the front ports to transfer files. My phone and tablet sync over wifi, they don't get plugged in. I have a charger behind my desk and a cable to charge them. My printer is on the network.The one place I DO need lots of USB ports is also the place where I have a small cube case machine, with no discreete GPU, because it doesn;t need one. On that one I added a USB PCI card to get enough ports. In addition to the keyboard and mouse, that machine is on my workbench where it connects to several electronic test instruments and I have multiple cabled for programming microcontrollers. I also have a USB microscope for board inspection. And then I have 3 more USB devices connected for my other hobby that shares the bench. Plus a front port kept free for USB sticks.
So the use case I have for more USB has the PCI slots open to add expansion cards, the use case where I have a discrete GPU eating up the slot space doesn't need an excess of USB ports.
DigitalFreak - Tuesday, June 16, 2020 - link
I use 3 USB 3.0 ports just for my Oculus Rift